================================
What’s new in release 3.0.57
Issues fixes:
#22577 - RTP: Avoid using reserved udp port used by the signaling
================================
What’s new in release 3.0.56
Enhancements:
#21263 - Adding support of host IP interfaces to SNMP ifTable requests
Issues fixes:
#22532 - SIP memory leak when NOTIFY is not handled properly
================================
What’s new in release 3.0.55
Enhancements:
#15712 - Support for MOS per call and per NAP
#21645 - SIP registration scanners protection
#22449 - Forward 407 Proxy Authentication between 2 legs
Issues fixes:
#22315 - SCTP init sequence is not working when initiated by the SG
#22362 - ISDN: Add a quirk to set N200 to 6
#22383 - Disable “Use Proxy Address” doesn’t disable “Filter by proxy port”
#22408 - SBC is using the old ip to match the user
#22508 - Tbrouter in safe mode should drop all packets
#22528 - TMG may not properly react to SIP call on hold, and to SIP call retrieval using re-invite without SDP
================================
What’s new in release 3.0.45
Enhancements:
#20036 - SBC Low-delay: Support SIP Pass-around mode (RTP no-anchoring)
#22350 - Allow to manipulate the connected number IE from the routing scripts
Issues fixes:
#22207 - Empty DNS list still gets applied even with the error upon activation
#22383 - Disable “Use Proxy Address” doesn’t disable “Filter by proxy port”
#22384 - Can not configure SIP Domain when creating a new NAP
#22408 - SBC is using the old ip to match the user
#22485 - Failed to launch tbrouter on some hosts
#22502 - Database upgrade script take to much time and RAM to create NAPs firewall rules
#22508 - Tbrouter in safe mode should block all packets
#22528 - TMG may not properly react to SIP call on hold, and to SIP call retrieval using re-invite without SDP
================================
What’s new in release 3.0.42
Enhancements:
#22415 - TSBC can’t loopback low-delay RTP packets to itself
================================
What’s new in release 3.0.41
Enhancements:
#22186 - SBC rules seem confusing and don’t work as expected
================================
What’s new in release 3.0.40
Issues fixes:
#21297 - 1+1: eth0/eth1 could not be configured because of a narrow netmask
#22325 - TMG H248 stopped working after package upgrade
#22422 - Fax call stops with 415_UNSPRTD_MEDIA in low-delay mode