Here is a list of issues fixed and enhancements for 3.0 version:
What’s new in release 3.0.39
Issues fixes:
#22428 - Toolpack should wait longer between applications relaunch during package update to avoid loosing active calls
================================
What’s new in release 3.0.38
Issues fixes:
#22411 - SBC needs to find the route for registered user when the To header doesn’t contain the “Domain”
================================
What’s new in release 3.0.37
Issues fixes:
#20872 - Failed upgrade because of NTP conf file
#21901 - Space after Destination IP address in SNMP Trap generates wrong trap message
#22325 - TMG H248 stopped working after package upgrade
#22409 - Need an option to set the priority among static route or dynamic route for registered users
================================
What’s new in release 3.0.36
Issues fixes:
#22382 - SBC cut part of the register authentication info
#22383 - Disable “Use Proxy Address” doesn’t disable “Filter by proxy port”
================================
What’s new in release 3.0.35
Enhancements:
#22375 - Implement Fraud call Removal
================================
What’s new in release 3.0.29
Enhancements:
#22347 - SBC drops call too quickly if more than one RTP stream is received on a call
Issues fixes:
#21534 - Snmp traps resent on activation of configuration
#22343 - TX is disable when SDP contains 2 media capabilities with one with a port=0
#22351 - SBC doesn’t pass RTP packets if payload type change within first few packets of the RTP stream
================================
What’s new in release 3.0.28
Enhancements:
#22266 - Reduce even more delay before audio is restored upon H.248 HA 1+1 switchover
================================
What’s new in release 3.0.27
Enhancements:
#22266 - Reduce delay before audio is restored upon H.248 HA 1+1 switchover
================================
What’s new in release 3.0.26
Enhancements:
#22191 - Allow IP on the same subnet for management ports
Issues fixes:
#22220 - SBC behaviour for session-timer re-INVITE: should not forward to other call leg
================================
What’s new in release 3.0.25
Issues fixes:
#22151 - Baseboard 1+1 switchover may cause dropped calls on remote equipment
#22205 - Missing GMT timezone in Webportal
#22220 - SBC behaviour for session-timer re-INVITE: should not forward to other call leg
================================
What’s new in release 3.0.18
Issues fixes:
#22163 - IP interfaces go UP and down when name contains a “-”
================================
What’s new in release 3.0.17
Issues fixes:
#22153 - Routeset routing feature no more supports digits A-F
================================
What’s new in release 3.0.16
Issues fixes:
#22114 - TMG does not always properly handle the SIP UPDATE message
================================
What’s new in release 3.0.15
Enhancements:
#22094 - Allow routing scripts to save per-call information between routing calls
#22101 - Support multiple SIP NAPs with same remote proxy IP, but different remote port
#22117 - Block invalid 100 trying for SIP Register to padd against Asterisk bug
================================
What’s new in release 3.0.14
Issues fixes:
#22076 - H.248: Payload type from profile should be used when MGC asks MG to choose
================================
What’s new in release 3.0.13
Issues fixes:
#21963 - SNMP v1 returns wrong IP interface
#22061 - H.248: “Termination out of service” sent by MG during 1+1 switchover, causing MGC to drop calls
================================
What’s new in release 3.0.12
Issues fixes:
#22019 - Web portal : should not be able to edit default CAS scripts without renaming
#22033 - ISDN progress message does not enable early media
================================
What’s new in release 3.0.11
Issues fixes:
#21934 - MTP2 link started flapping after added new ISUP interface
#21954 - Invalid Tone detection mask sent to telecom when using CAF API
================================
What’s new in release 3.0.10
Issues fixes:
#21651 - SIP RE-invite with DNS cache enabled are leaking internal buffer making NAP to become
unavailable
#21708 - ACM/CPG diversion parameter mapping from ISUP/ISDN to SIP
#21782 - Reserved ports may leak on eth1 when doing playback and recording simultaneously and
stopping recording first
#21798 - REFER scenario supports NOTIFY with 180/183 status code
================================
What’s new in release 3.0.9
Issues fixes:
#21667 - Fax are not passing in passtrough when FAX tone detection is enabled on the IP side of IP<->TDM call
#21793 - TMG does not pass UUI from receiving Refer-To header to outing Refer-To header
#21798 - [Tentative] REFER scenario supports NOTIFY with 180/183 status code
#21831 - Failed to configure network devices roles
Enhancements:
#21786 - Include SIP keepalive message in SIP simulated flow to better pad against lost BYE packets
================================
What’s new in release 3.0.8
Issues fixes:
#21746 - SIP outgoing calls are dropped every time we reload the configuration
#21753 - tbsip: improve performance
================================
What’s new in release 3.0.7
Issues fixes:
#21633 - Corrupted grub file preventing kernel update